HOME.TITLE สินค้าและบริการ เครื่องวัดก๊าซรั่ว

เครื่องวัดก๊าซรั่ว

ผู้เขียน

ผู้ดูแลระบบ

เนื้อหา

Gas detection should not be complicated. The Beacon 110 is gas detection simplified.

The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection.

It is microprocessor controlled, versatile, simple to install and operate, and priced to be

the industry’s best value single gas detection controller. It is capable of accepting RKI sensors

directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide.

The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be

mounted directly at the Beacon 110 housing, or can be wired remote from the controller.

The 10 amp rated relays are strong enough to directly power external alarms and horns.

The digital display has backlighting and simultaneous readout of the gas type and concentration.

The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. This case design

complies with lock out / tag out standards and can be fully secured. An external reset switch allows

the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete

with a wall mounting kit for easy installation.

RKI offers the industry’s widest selection of standard and toxic gas detection sensors, which can be

utilized with the Beacon 110, providing gas monitoring protection for almost any application.

Physical

Dimensions	Height: 8.5" 216 mm
	Width 7.0" 178 mm
	Depth 4.3" 109 mm
Enclosure	Wall mounting grey polycarbonate with hinged cover.
Conduit	3/4" NPT conduit hubs, 2 provided.
Connection	1 for sensor wiring
	1 for power & relay wiring
Wiring	Screw type terminal block 14 gauge max.
Termination	Screw type terminal block 14 gauge max.
Power	Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available
Controls	3 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset

Environmental

Operating Temp	14°F to 122°F (-20°C to 50°C)
Storage Temp	-4°F to 158°F (-20°C to 70°C)
Relative	0 - 100% RH
Humidity	0 - 100% RH
Enclosure	NEMA-4X enclosure, waterproof, chemical, and weather resistant.
Rating

Inputs

Direct Wired	LEL
Sensors	Oxygen
	Carbon Monoxide
	Hydrogen Sulfide
	Remote amp not required for less than 500 feet.
4-20 mA Sensors	Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. (See list of detectable gases.) Wiring distances up to 5000 feet
Sampling Methods	Diffusion and sample draw heads available.

Outputs

Relays	3 relays - 10 amp rating (at 115 VAC), SPDT isolated contacts. 2 relays for gas alarms and 1 trouble relay. Relays fully programmable for: increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off
4-20 mA	Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel
24 VDC	24 VDC (400 mA max) output provided to operate sample drawing adapters or other accessories
Display	2 x 8 Alphanumeric display with backlighting.
Audible	Built-in audible alarm, 94 dB, mounted on enclosure
Audible	Coded output: pulsing = gas alarm, steady = fail
Visual	3 LED’s on the front cover for alarm status indication, and malfunction

Warranty

One year materials and workmanship

Partial List Of Detectable Gases

Many other gases or ranges available. Contact RKI for gases or ranges not listed

ป้อนรหัสผ่านของคุณเพื่อแก้ไขโพสต์

ป้อนรหัสผ่านเพื่อลบโพสต์

MY MENU